Investigation Axial Global Directional in ANSYS Software of Concrete Mixed Beam Structures


Abstract

The model structure of the coordinated systems under the name of concrete-mixed beam structures using ANSYS 12.0 software was designed in 3D. Concrete mixture was selected as the element type of the model structure. Model prototype was created by measuring distance dependent with 16 coordinate points. Mesh segmentation was applied to the 3D concrete mixed beam model and 75 N/mm2 load and 32.174ft / sec2 acceleration motion were applied to the carrier systems. In the results of the application, global directional changes between the model groups were examined. As a result of the global investigations, ANSYS software has determined that the mechanical improvements should be at the joints where the beams connected to the axes and the concrete bases meet.

 

Read more about this article : https://lupinepublishers.com/mining-mechanical-engineerning/fulltext/investigation-axial-global-directional-in-ansys-software-of-concrete-mixed-beam-structures.ID.000103.php


Read more Lupine Publishers Google Scholar Articles :https://scholar.google.com/citations?view_op=view_citation&hl=en&user=dtO2BpUAAAAJ&citation_for_view=dtO2BpUAAAAJ:YsMSGLbcyi4C

Comments

Post a Comment

Popular posts from this blog

Experimental Investigation of a Spoiler’s Impact on the Flow Pattern of a High-Speed Sport Car

  Abstract In this study, the spoiler effect in a different angle of attacks that makes the maximum downforce is conveyed. Two different facilities are utilized to set up the experiment. A wind tunnel is used to measure the downforce and drag force, and a water tunnel is used to observe the velocity profile and flow field visualization. The result revealed that a 12° angle of attack is the optimal angle for designing the spoiler. Twelve degrees angle of attack provided the highest downforce. This downforce can improve the stability of high-speed sports car without increasing much drag. Compared to the angle of attack of 5°, the downforce of the angle of attack equal to 12° increases 233%, but the drag force only increases by 15% in wind tunnel experiments.   Read more about this article : https://lupinepublishers.com/mining-mechanical-engineerning/fulltext/experimental-investigation-of-a-spoilers-impact-on-the-flow-pattern-of-a-high-speed-sport-car.ID.000110.p...
Read more

Theoretical Feasibility Research on 3D Printing Technology Applied to Statics Model Experiment

  Abstract 3D printing is effective to manufacture experimental models widely used in analogous statics tests before practical engineering applications. Whereas, traditional statics model experiments with strict dimensionless function are hardly to be established through 3D printing items according to similarity theory. To find a solution, this paper theoretically simplifies the statics system based on reducing constrains of weight and Poisson’s ratio. This simplification is the core of a new method of additional weight and correction to identify the simplified and the original statics systems. Operation procedures are displayed through case studies using the new method. 3D printed materials for specific statics experiments are validated as well through coefficient corrections. The results will finally contribute to 3D printing technology applied to analogic static research, for not only academic but also industrial purposes.   Read more about this article : ht...
Read more

Syngas Compositions, Cold Gas and Carbon Conversion Efficiencies for Different Coal Gasification Processes and all Coal Ranks

  Abstract This Paper presents comparison of syngas compositions, for all coal ranks, as produced from different types of coal gasification processes currently in use, namely entrained flow, fluidized bed, and fixed bed gasifiers. Cold gas and carbon conversion efficiencies were investigated. The syngas composition varies with the applied gasification process. The importance of this research arises from the fact that gasifiers produce the environmentally clean fuel required to run any Integrated Gasification Combined Cycle power system. A procedure was conducted to get estimates for bituminous coal. It is important to have knowledge of the chemical reactions which take place in each gasifier and the raw syngas produced from the specific reaction involved to develop an Integrated Coal Gasification Combined Power Generation plant with CO 2 recovery in order to increase the cycle efficiency and mitigate CO 2 emission and other pollutants. The results indicate that t...
Read more